DL4500-EDH-485 Ethernet TCP/IP to Allen Bradley DH-485

Price $1,695 USD
Lightweight, Din Rail Mounted, DC powered network interface bridge. Uses Lantronix’s industry proven 10-Base T Ethernet TCP/IP module to access Allen Bradley DH485 network. DH485 auto baud detection and other features make Telneting over Ethernet to the Lantronix Module the only configuration needed for the TCP/IP version. The DL4500-EDH-485 encapsulates DF1 packets over Ethernet. The DL4500-EDH-485 does not support Allen Bradley Ethernet (CSP) or Ethernet/IP protocols. Ethernet based processors like the ControlLogix can not access the DH485 network using the DL4500.

The DL4500-EDH485 available in two different models: the DL4500-EDH485 DF1-MultiMaster and the DL4500-EDH485 Standard Tunnel.
The DL4500-EDH485 DF1-MultiMaster allows up to 4 computers to connect simultaneously to the ethernet side of the DL4500. This model has slower data exchange speeds because of its ability to connect to multiple computers. If speed is an issue, consider the DL4500-EDH485 Standard Tunnel model.
The DL4500-EDH485 Standard Tunnel allows only 1 computer to connect to the ethernet side of the DL4500 but exchanges data at faster speeds.
Documentation

• DL4500 – User Manual
• Wiring Allen Bradley DH485 devices to Equustek DH485
• DL4500-EDH-485 Spec Sheet
• change Firmware DL4500EDH485 from Mutilmatser DF1 to standard Tunnel DF1
• DL4500 Lantronix Device Installer Version 3.6 Quickstart Manual
• DL4500 RSLINX Quick Start
• DL4500-EDH+/485 Hardware Quick Start Application note
• Kepware Setup
• DL4500 Lantronix Redirector Software Manual

• DL4500-EDH+allows DF1 serial drivers to communicate over Allen Bradleys DH+ network via TCP/IP protocol.
• DL4500-EDH-485allows DF1 serial drivers to communicate over Allen Bradleys DH-485 network via TCP/IP protocol.

• Wonderware Application Note – The ABKF2 I/O Server
• Wonderware Application Note – The WWRSLinx I/O Server

Application Diagrams

• DL4500 EDH+ / EDH-485 Application Sample Diagram

Videos

• How to Set the IP Address and the serial Telnet Settings for Equustek DL4500 EDH+ Standard Tunnel
• If Equustek DL4500 is Not found using Lantronix Device Installer or even using ARP then find out here how to set it’s IP address
• How to set Allen Bradley RSLINX DF1 Driver for Equustek DL4500 EDH+ Ethernet TCP/IP ( Tunneled DF1 )to DH+ Protocol Converter
• How to Set the IP Address and the serial Telnet Settings for Equustek